Flame Proof 400A 1140V High Voltage Vacuum Switchgear For Mine KJZ manufacturer from China CHANGZHOU LANNERET INTERNATIONAL TRADE CO., LTD.

Flame Proof 400A 1140V High Voltage Vacuum Switchgear For Mine

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: KJZ

Flame Proof 400A 1140V High Voltage Vacuum Switchgear For Mine

<span style=

Flame Proof 400A 1140V High Voltage Vacuum Switchgear For Mine

Description:

QJZ-315/1140(660) Z mine use flame-proof and intrinsically safe vacuum electromagnetic starters are suitable for underground mines containing explosive gas (methane) and coal dust.Along the axis of combination switch 4 respectively installed the three-layer switch components from bottom to top, each layer has a dynamic contact 8, a pair of static contact and a pair of terminal 1, 9 layers respectively control the flux and a branch off, form the combination switch triode. They start and stop directly or remotely motors with rated current up to 315 A ( 400A) on the power supply system of a. C. 50Hz, 1140V or 660V, and they provide protection of motors and their power supply lines.

Competitive Advantage:

16 bit micro-processor for intelligent control, Chinese(English) character LCD, current detection and fault output, optional data transmission interface (RS485 or Device Net) and optional built-in FLEX I/O for remote control.

Specifications:

Item		Content
		QJZ-315/1140(660)Z
Rated voltage		1140/660V
Rated current		315A
Controlled motor power	Voltage 1140V	75-460kW
	Voltage 660V	40-250kW
Dimensions/weight		800580889mm/390kg
Type of Protection		Mine use FLP I.S. safe type Exd [ib] I
Outside diameter of inlet cable		Power line: 32-78mm Control line: 14-21mm
Protection function		Overload, short-circuit, phase failure, leakage-lockup, overvoltage and under voltage
Fault protection output		2 circuits: short circuit/leakage, overload/phase failure
Current or frequency output		Current signal: DC1-5mA Pulse frequency signal: 200-1000Hz
Display		Running parameters: voltage, under voltage/overvoltage, current, insulation resistance and electric network frequency Mode of operation: stop/start of this starter; stop/start of the following starter Fault signal: short-circuit, overload, leakage, phase failure Fault status: signal back from this device; signal back from the other device
Settings		Rated current, voltage, programmable control state of the following device, programmable control delay of the following device, current output, test value, start short circuit delay
Data communicate interface (optional)		RS485 or Device Net RS485 or Device Net